Photontek SQ200W Pro Led
Product Info
For all Inquiries (Including Newest Pricing) : Please contact Us at 1 (506) 854-6508 or via email @ info@greencorner.ca
The P-TEK SQ200W Pro LED is an electronic horticultural LED fixture using a compact design with an externally controllable & dimmable driver. The SQ200W Pro fixture is a high performance full-cycle top lighting solution for commercial horticulture cultivation, with the power and flexibility to scale from propagation and cloning through vegetative growth to higher light intensities in bloom. In this manual the P-TEK SQ200W Pro LED will be referred to as: “the LED fixture”.
Features
– High Fixture Efficacy 2.5 µmol/J
– High PPF output for high intensity 508 µmol/s
– Lowest $/µmol
– World Class Diodes & Drivers
– Optimized light spread and uniformity
– New Clear Glue Technology on the LED Bars Protection Cover
– Compact design ideal for up to 2.6’x2.6’ grow area
– Balanced Full-Spectrum by White, Red & Far Red diodes combination
– Fully Dimmable
– External Control with P-TEK Digital Controller
– User Friendly & Easy Set-Up
Producing very high levels of PPF output of 508 µmol/s and a Photon Efficacy (fixture efficiency) of 2.5 µmol/J, the SQ200W Pro LED creates a homogeneous light spread at close distance from the crop canopy, resulting in outstanding results when used in 2.6’x2.6’ coverage indoor grow areas.
The outstanding performance of the SQ Pro line was achieved through a square shape LED bar design built with latest generation top bin White, Red and Far Red diodes and world class P-Tek controllable drivers. The LED bars are covered with a thin layer of Clear Glue, resulting in higher light transmittance of 99% without light loss, IP65 rating, extended lifetime of diodes and extra corrosion resistance.
The SQ200W Pro array creates a uniform spread of light at short distance from the crop ensuring excellent penetration of canopy without hotspots and excessive heat. The advanced heat sink and use of passive natural convection has eliminated the need for a fan, decreasing noise output and significantly improving the life span of the fixture as it has no moving parts.
Full-Spectrum
This grow light LED is designed with all grow cycles periods in mind, from propagation, to vegetative and flowering, this fixture may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency.
P-Tek SQ Pro LED grow lights use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption.
More Control
In addition, the SQ200W Pro LED fixture can be externally controlled with a P-TEK Digital Lighting Controller featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
Universal Control Systems Compatibility
P-Tek Pro LED Fixtures can be fully controlled with either the P-Tek Digital Controller or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.